Product Details:
Minimum Order Quantity | 1 Piece |
Model Name/Number | AMPRO-T7205J |
Material | Electronics |
Brand | AMPRO |
Battery | 0-50 Volt |
Display | Digital |
Usage/Application | Auto Electrician |
Voltage | 3 Volt DC |
The Gautoprobe Digital Pulse Tester is an easy-to-use Gautoprobe, making trouble-shooting fast, easy and accurate.
Features:
1. Starting & Charging System
2. Electrical Relay & Actuator
3. Sensors
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Usage/Application | Automobile |
Packaging | Plastic |
Brand | AMPRO |
Model Name/Number | AMPRO-RCT |
Body Material | Plastic |
Capacity | 200 |
Weight | 500g |
Phase | Battery |
Power Source | 12-Volt Battery |
Voltage | 12 Volt |
AMPRO-RELAY CIRCUIT TESTER
Relay circuit tester is aimed at finding the problem of the circuit intuitively!
How to use:-
1. Pull off the test relay and exchange it for the targeted relay.
2. Connect the power to the battery.
3. Connect the relay circuit tester and the test relay with a data cable.
4. Press the Relay Type Selection S/W (green buttons) to select the appropriate relay type. (A and B type are general A contact type and C is B contact type)
5. Activate the relay. If the relay is properly activated the indicator lights on battery power and the voltage is displayed on the numeric display. Monitor the each three color LED.
(Each 3 color LED is logic probe. Not only has 3 color lamp, but also has logic probe. If there is no ground, no lamp turns on)
6. To read voltage on the each pin, use the relay pin selection S/W.
7. If it’s not connected, the 3 color lamp turns off and the voltage meter shows “oPn” to indicate that the pin circuit is opened.
With the relay circuit tester, any relay circuit such as an air conditioner compressor, a rear glass heating element, or a cooling fan motor can be inspected immediately for a problematic circuit in a short time.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | AMPRO |
Product Type | CAR MEMORY SAVER |
Material | Electronic |
Weight | 200g |
Color | Black and Red |
Led Indicator | Yes |
Instruction:-
1. Supported OBDII vehicle - Connect the clamps to battery. Then, the green light of battery connection lamp turns on.
Plug ECU Saver to OBDII connector of vehicle. (put Ignition key off)
Non supported OBDII vehicle - Turn the ignition key to "ACC". Plug the cigar jack cable to cigar jack of vehicle.
2. Pull out the negative terminal(-) of a battery in vehicle.
What’s included:-
1. ECU Saver
2. Cigar jack cable
AMPRO-ECU Saver Applications:-
Note:-
* Even if the clamps are reversely connected, no damage causes in your vehicle.
The internal circuit of ECU Saver will automatically block the power.
* Overload may cause damage in a fuse of cigar jack.
If you need to replace of it, turn the tip of male cigar jack and change the fuse with new one.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Model Name/Number | Singsing-Probe |
Material | Plastic Body |
Brand | AMPRO |
Battery | 3 Volt |
Display | LED |
Warranty | 1 Year |
Packaging Type | Curtain |
Power Type | Battery |
Please refer to the following while watching CD. A) Lamp and beep When you watch the demo, you''''''''ll see that the glittering of lamp and the sound varies upon the actuators. It''''''''s because each parts have different magnetic power. As long as the lamp and beep is on, that means the actuator is working well. But if the lamp and beep is off, that actuator has a problem. Therefore, our Singsing Probe could be a key role when mechanics judge which part is breakdown. B) Switch I and II from Singsing Probe mainbody Switch II : For normal use. Switch I : For the part of which regular magnetic power is very strong. Some parts have very strong magnetic power. Those parts still remains magnetic a little even though it doesn''''''''t work well. In this case, Switch II can make lamp and beep on. Then, change the switch I into II and test again. | |
The real working condition | Start the vehicle. Don''''''''t take off any actuators from the vehicle. And touch each part with Singsing Probe. |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Set |
Material | Electronics |
Packaging | Plastic box |
Brand | AMPRO-GAUTO |
Model Name/Number | Multiprobe |
Battery | DC 12 Volt |
Warranty | One Year |
Uses | Automobile Electrician |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | Ampro-Gauto |
Battery | 12 Volt DC |
Display | Digital |
Usage/Application | Car Repair Workshope |
Voltage | 12 Volt DC |
Warranty | One Year |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | AMPRO-GAUTO |
Battery | 3 Volt DC |
Display | Digital |
Usage/Application | Automotive Electrician |
Voltage | 3 Volt DC |
Warranty | One Year |
Specification:
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | AMPRO-GAUTO |
Battery | 2 Pencil Cell AA |
Display | Digtal |
Usage/Application | Car Electrician |
Voltage | 3 Volt DC |
Warranty | One Year |
Made From | South Korea |
Specification:
Additional Information: